[A]
[B]
7. Lay the transfer unit on its side.
8. Grasp the upper end of the transfer belt. Then pull the transfer belt [A] up and
out.
9. Clean the transfer belt mark sensor [C] with Blower brush.
NOTE: Clean the drive rollers with a damp cloth if they are dirty.
When you reinstall the transfer belt
The transfer belt must be installed with the mark "[B]" at the front side of the
machine.
Do the same procedures mentioned in 3.10.1 after you replace the transfer belt.
SM
TRANSFER AND PAPER TRANSPORT UNIT
B178R632.WMF
3-59
[C]
B178R575A.WMF
B202/B178/B180