Installing Another Language - Ricoh B202 Service Manual

This procedure does not download the following data to the NVRAM:
• Total Count
• C/O, P/O Count

5.6.6 INSTALLING ANOTHER LANGUAGE

Many languages are available. But you can only switch between two languages at
a time. Do the following procedure to select the two languages you want. You can
select both of the languages you want from the user interface on the operation
panel.
1. Switch the copier main power switch off.
2. Insert the SD card with the language data into SD Card Slot 3.
3. Switch the copier main power switch on. The initial screen opens after about 45
seconds.
4. Touch "Language Data (2)" on the screen (or press ).
5. Touch "LANG. 1(1)" or "LANG. 2(2)"
Key
Touch this button on the screen (or press  on the 10-key pad) to open the next
LANG. 1(1)
screen so you can select the 1st language.
Touch this button on the screen (or press  on the 10-key pad) to open the next
LANG. 1(2)
screen so you can select the 2nd language.
Touch this key on the screen (or press  on the 10-key pad) to quit the update
Exit(0)
procedure and return to normal screen.
SM
Download Language
LC D C R O M B 0705370
N ow Lang.
Japanese 2. 87
LANG. 1(1)
-> ------------
------
LANG. 2(2) Engl i sh - U K 2. 87
-> ------------
------
What it does
5-157
FIRMWARE UPDATE
Lang. C ard ------
S el ect Lang.
---------------
---------------
---------------
---------------
Exit(0)
B178S930.WMF
B202/B178/B180