Registration - Ricoh B202 Service Manual

IMAGE ADJUSTMENT

3.2.3 REGISTRATION

Image Area
B
Make sure that the registration is
Feed direction
adjusted within the adjustment standard
range as shown below.
A
Image Area
C
A = B = C = 4.2mm (1.6")
Leading Edge
B178R509.WMF
Adjusts the leading edge registration for each paper type and process line speed.
Side to Side
Adjusts the side-to-side registration for each paper feed station. Use SP mode
(SP1-002) to adjust the side-to-side registration for the optional paper feed unit,
LCT, and duplex unit.
Adjustment Standard
• Leading edge (sub-scan direction): 3 ± 0 mm
• Side to side (main-scan direction): 2 ± 0 mm
Paper Registration Standard
The registration in both main- and sub-scan directions can change within the
following tolerance.
1st side
• Sub-scan direction: 0 ± 1.5 mm
• Main-scan direction: 0 ± 2 mm
2nd side in duplex
• Sub-scan direction: 0 ± 3 mm
• Main-scan direction: 0 ± 4 mm
SM 3-5 B202/B178/B180