Ifax Specifications - Ricoh B202 Service Manual

3. IFAX SPECIFICATIONS

Type
Fax Unit and Printer/Scanner Unit
Connectivity
Local area network
Ethernet 100base-Tx/10base-T
IEEE1394 (IP over 1394)
IEEE802.11b (wireless LAN)
Connection
100base-Tx/10base-T direct
connection
Resolution
Main scan: 400 dpi, 200 dpi
Sub scan: 400 dpi, 200 dpi, 100 dpi
NOTE: To use 400 dpi, IFAX SW01 Bit
4 must be set to "1" or "Full
mode" in the address book of a
client pc must be selected with
Web Image Monitor.
Transmission Time
1 s (through a LAN to the server)
Condition: ITU-T #1 test document
(Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Document Size
Maximum message width is A4/LT.
NOTE: To use B4 and A3 width, IFAX
SW00 Bit 1 (B4) and/or Bit 2
(A3) must be set to "1" or "Full
mode" in the address book of a
client pc must be selected with
Web Image Monitor.
SM
E-mail File Format
Single/multi-part
MIME conversion
Image: TIFF-F (MH, MR, MMR)
format only
Protocol
(Supported by TCP/IP protocol)
Transmission:
SMTP, TCP/IP
Reception:
POP3, SMTP, IMAP4, TCP/IP
Data rate
100 Mbps(100base-Tx)
10 Mbps (10base-T)
Authentication method
SMTP-AUTH
POP before SMTP
A-POP
Remark
The machine must be set up as an e-
mail client before installation. Any
client PCs connected to the machine
through a LAN must also be e-mail
clients, or some features will not work
(e.g. Autorouting).
133
SPECIFICATIONS
B712