Reboot/System Setting Reset - Ricoh B202 Service Manual

Hide thumbs Also See for B202:

Table of Contents

5.5 REBOOT/SYSTEM SETTING RESET

5.5.1 SOFTWARE RESET

You can reboot the software with one of the following two procedures:

1) Turn the main power switch off and on.

2) Press and hold down   together for over 10 seconds. When the

machine beeps once, release both buttons. After "Now loading. Please wait"

shows for a few seconds, the copy window will open. The machine is ready

for normal operation.

5.5.2 SYSTEM SETTINGS AND COPY SETTING RESET

System Setting Reset

The system settings in the UP mode can be reset to their defaults. Use the

following procedure.

1. Press User Tools/Counter

2. Hold down  and then press System Settings.

NOTE: You must press  first.

3. Press yes when the message prompts you to confirm that you want to reset the

system settings.

4. Press exit when the message tells you that the settings have been reset.

REBOOT/SYSTEM SETTING RESET

B178S914.JPG

B202/B178/B180

Table of Contents