Settings Relevant To Contract - Ricoh B202 Service Manual

Settings Relevant to Contract

Change the necessary settings for the following SP modes if the customer has
made a service contract.
NOTE: You must select one of the counter methods (developments/prints) in
accordance with the contract (
Item SP No.
Counting SP5-045-001
method
/11" x 17" SP5-104-001
double
(Special Service
counting
Program)
Service Tel. SP5-812-001
No. Setting through 004
SM
SP5-045-001).
Function
Specifies if the counting method used in
meter charge mode is based on
developments or prints.
NOTE: You can set this one time only.
You cannot change the setting
after you have set it for the first
time.
Specifies whether the counter is
doubled for 11" x 17" paper.
NOTE:
When you change this setting,
contact your supervisor.
Programs the service station fax
number.
The number is printed on the counter
list when the meter charge mode is
selected. This lets the user fax the
counter data to the service station.
1-11
MACHINE INSTALLATION
Default
"0":
Developments
"No": Single
counting
B202/B178/B180/