Internet Mail Communication - Ricoh B202 Service Manual

5.4.3 INTERNET MAIL COMMUNICATION

Mail Transmission
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC –
Internet/LAN Fax Boards – Mail Transmission
Data Formats
The scanned data is converted into a TIFF-F formatted file (only MH compression
can be used).
The fields of the e-mail and their contents are as follows:
Field
From
Reply To
To
Bcc
Subject
Content Type
Content Transfer Encoding
Message Body
Selectable Options
These options are available for selection:
• With the default settings, the scan resolution can be either standard or detail.
Inch-mm conversion before TX depends on IFAX SW01 Bit 7. Detail resolution
will be used if Super Fine resolution is selected, unless Fine resolution is enabled
with IFAX SW01.
• The requirements for originals (document size, scan width, and memory
capacity) are the same as for G3 fax memory tx.
• The default compression is TIFF-F format.
• IFAX SW00: Acceptable paper widths for sending
• IFAX SW09: Maximum number of attempts to the same destination
Secure Internet Transmission
• SMTP Authentication:
User Tools> System Settings> File Transfer> SMTP Authentication
• POP Before SMTP:
User Tools> System Settings> File Transfer> POP Before SMTP
SM
FAX COMMUNICATION FEATURES
Mail address of the sender
Destination requested for reply
Mail address of the destination
Backup mail address
From CSI or RTI (Fax Message No. xxxx)
Multipart/mixed
Attached files: image/tiff
Base 64, 7-bit, 8-bit, Quoted Printable
MIME-converted TIFF-F (MIME standards specify how files
are attached to e-mail messages)
121
Content
B712