3.10.2 TRANSFER BELT CLEANING UNIT
NOTE: Reset the maintenance counter, (SP7-804-18) after you replace the
transfer belt-cleaning unit.
[A]
Pull out the transfer belt-cleaning unit [A] ( x 1) at the same time you push the
lever.
NOTE: 1) The blade [B] can damage the belt if you do not continue to push the
lever.
2) Make sure that the transfer unit release lever is put back to the original
position (
Do a forced line position adjustment (SP5-993-002 or > Maintenance > Color
Registration) after you replace the transfer belt-cleaning unit.
SM
TRANSFER AND PAPER TRANSPORT UNIT
2
1
3.8) when you reassemble.
3-55
[B]
B178R590.WMF
B202/B178/B180