Stack Tray; Stapler - Ricoh B202 Service Manual

SADDLE STITCH

3.7.2 STACK TRAY

The stack tray operates as follows:
1. The stack-tray stopper aligns the right
edges of the paper in the stack tray (!
"Stack-Tray Stopper" in 3.4.1).
2. The jogger fences adjust the position of
the paper (! 3.4.4).
3. When a specified number of paper [A] is
stacked, the paddle motor operates in
reverse to lower the stack-tray guide and
the stack-tray upper roller [B] onto the
paper.
4. The stack-tray exit motor drives the
stack-tray upper roller and lower roller to
transport the paper to the stapler unit.
5. The booklet clutch [D] turns on. This
clutch transmits the driver power of the
transport motor to the stack-tray
transport roller [C].

3.7.3 STAPLER

The stapler waits for the paper in the ready position, and operates when the paper
is set to the stapler positions (! 3.5.3). When the finisher is processing one sheet
of paper, the stapler does not staple the paper.
B602
[A]
60
[B]
[C]
B602D928.WMF
[D]
B602D950.WMF
SM