Power Supply Cords For Ac Power Supplies; Installing An Extreme Networks Ac Power Supply - Extreme Networks BlackDiamond 8800 Hardware Install Manual

Hide thumbs Also See for BlackDiamond 8800:
Table of Contents

Advertisement

600/900 W AC power supply
For the system to recognize a 600/900 W AC power supply, the MSM installed in your
BlackDiamond 8806 switch requires ExtremeXOS version 11.6.1 (or later). In ExtremeXOS releases
11.3.4, 11.4.2, and 11.5.1, the 600/900 W AC power supply is disabled on all chassis. In ExtremeXOS
releases earlier than those, the software does not recognize the 600/900 W AC power supply and
the power supply will not be budgeted properly, possibly resulting in power supply shutdown
and/or chassis reboot.
700/1200 W AC power supply
The 700/1200 W AC power supply is supported by all versions of ExtremeXOS software.
1200 W DC power supply
For the system to recognize the 1200 W DC power supply, the MSM in your BlackDiamond 8800 Series
switch must be running ExtremeXOS version 11.3 or later.

Power Supply Cords for AC Power Supplies

The AC power supplies used with the BlackDiamond 8800 Series switches can use either 110 V AC or
220 V AC power supply cords.
power output allowed by these power cords when used with each AC power supply.
Power supply cords are not shipped with the AC power supplies. To purchase an AC power cord,
contact your local Extreme Networks Channel Account Manager or Sales Manager, or purchase a cord
from your local supplier. The power cord must meet the requirements listed in
Devices
on page 143.
Warning
Be sure that the source outlet is properly grounded before plugging the AC power cord into
the Extreme Networks AC power supply.
Table 22: AC Power Supply Cords
Cord Type
110 V AC
220 V AC

Installing an Extreme Networks AC Power Supply

This section describes how to install either of the following Extreme Networks UL-listed accessory
power supply units:
700/1200 W AC power supply (Model number 60020/PS 2336): compatible with the BlackDiamond
8806 switch and the BlackDiamond 8810 switch
600/900 W AC power supply (Model number 41050/PS 2431): compatible only with the
BlackDiamond 8806 switch
BlackDiamond 8800 Hardware Install Guide
Table 22: AC Power Supply Cords
Maximum DC Output Power
600/900 W AC Power Supply
600 W
900 W
Installing Power Supply Units (PSUs)
on page 79 shows the maximum DC
Cable Routing for PoE
700/1200 W AC Power Supply
700 W
1200 W
79

Advertisement

Table of Contents
loading

Table of Contents