Extreme Networks BlackDiamond 8800 Hardware Install Manual page 68

2 On each side of the shipping carton, remove the clip lock at the bottom (see
the BlackDiamond 8806 Chassis Shipping Carton
a Using your thumb and index finger, squeeze the prongs together to release the clip lock.
b Pull the clip lock outward from the carton.
c Repeat these steps to release each remaining clip lock.
Figure 44: Clip Locks on the BlackDiamond 8806 Chassis Shipping Carton
3 Slide the shipping carton up over the BlackDiamond 8806 chassis
Remove the inside corner braces.
Figure 45: Removing the Carton from the BlackDiamond 8806 Chassis
4 Unwrap the chassis.
BlackDiamond 8800 Hardware Install Guide
Installing the BlackDiamond 8800 Series Chassis
on page 68).
(see the following
Figure 44: Clip Locks on
figure).
68