Blackdiamond 8810 Chassis - Extreme Networks BlackDiamond 8800 Hardware Install Manual

Figure 2: Rear Panel of the BlackDiamond 8806 Chassis
1 = Grounding point
The rear panel of the BlackDiamond 8806 chassis provides:
•
Chassis serial number
•
Ethernet MAC address of the switch
•
Symbols of safety certification
•
Access to the PSU/fan controllers
•
Attachment point for optional chassis ground

BlackDiamond 8810 Chassis

The BlackDiamond 8810 chassis includes the following physical features:
•
One 10-slot chassis with backplane
•
Eight dedicated I/O module slots, labeled 1, 2, 3, 4, 7, 8, 9 and 10
•
Two dedicated MSM slots, labeled 5/A and 6/B
Note
On systems running EXOS 15.x, slot 6/B can accommodate either an 8800-MSM48c, an
8800 e-Series I/O module, or an 8800 c-Series I/O module. On all other EXOS versions,
slot 6/B can accommodate an MSM only.
•
Power supply bay that accommodates up to six power supplies, accessed from the front of the unit
•
One fan tray, accessed from the front right of the unit
•
One connector for an ESD-preventive wrist strap
Depending on the MSMs and I/O modules installed, the BlackDiamond 8810 chassis can support up to
80 gigabits per second of bandwidth per slot.
BlackDiamond 8800 Hardware Install Guide
Overview of the BlackDiamond 8800 Series Switches
2 = PSU/fan controller access panel
12