Tip shield replacement
Tip shields can become torn or damaged over time. This can have a negative impact on the
surface finish and detail of models.
Figure 28:
Tip shield damage
1.
Enter Head Maintenance.
a.
From the display panel press Maintenance.
Press Machine.
b.
c.
Press Head. The head will come to rest in the center of the chamber and the Z platform
will change position.
Gloves:
printer.
2.
Remove the head cover by pressing the tabs in and pulling away from the head. See
29.
Figure 29
Head cover tab locations
Head cover
New shield
The head area is hot, wear gloves when working in this area of the
40
Worn shield
Press tabs in to remove
head cover
Figure