Installing Forklift Access Covers - µ-Dimension BST 1200es User Manual

Installing Forklift Access Covers

The forklift access covers can be placed over the forklift channels after the printer is placed in its
final location. The covers are press-fit in the front and held in place with one screw in the rear.
1. Align the left and right side fork lift covers with the forklift channel and slide the tabs into the
slots. See
Figure 7 Installing the forklift access covers
2. Push the forklift covers in until they are flush with the back of the printer and install the
mounting screws using a 1
Figure 8 Installing forklift access cover mounting screws
Figure 7.
⁄ "
T handle Allen wrench from the Startup Kit. See
8
Attach screw at back of
printer
Insert tab
1 1
Figure 8.