How To Use This Manual; Learn More; Recycling; Safety Precautions - µ-Dimension BST 1200es User Manual

Hide thumbs Also See for BST 1200es:
Table of Contents

Advertisement

How To Use This Manual

This User's Guide is laid out in easy to follow sections which cover Set-up, Operation, Maintenance,
and Troubleshooting. Be sure to read each section carefully so that you will get the best
performance from your system.
Throughout this User Guide, text representing Interface Messages that appear on the display panel
are presented in a bold font.

Learn More!

An electronic User Guide is available on the User Guide CD. This guide provides information on the
following topics:
Troubleshooting information
Important safety notices and regulatory information
Detailed user instructions
You can also find more information at:

Recycling

Visit
http://www.stratasys.com/recycle

Safety precautions

The following precautions ensure the proper use of the printer and prevent the printer from being
damaged. Follow these precautions at all times.
Use the power supply voltage specified on the nameplate. Avoid overloading the printer's
electrical outlet with multiple devices.
Ensure the printer is well-grounded. Failure to ground the printer may result in electrical shock,
fire and susceptibility to electromagnetic interference.
Before disassembling or repairing the printer yourself, contact your local Service
Representative. See Support section of User Guide.
Use only the power cord supplied with the printer. Do not damage, cut or repair the power
cord. A damaged power cord has risk of fire and electric shock. Replace a damaged power
cord with an approved power cord.
Do not allow metal or liquids to touch the internal parts of the printer. Doing so may cause
damage, fire, electric shock or other serious hazards.
Power off the printer and disconnect the power cord from the power outlet in any of the
following cases:
If there is smoke or an unusual smell coming from the printer.
If the printer is making an unusual noise not heard during normal operation.
A piece of metal or a liquid touches the internal parts of the printer.
During an electrical (thunder/lightning) storm
During a power failure
http://www.stratasys.com
for recycling information.
2
or email
info@stratasys.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sst 1200es

Table of Contents