Tip Shroud Replacement - µ-Dimension SST 1200es User Manual

Build Up Area

Tip Shroud Replacement

Tip shrouds can become torn or damaged over time. This can have
a negative impact on the surface finish and detail of models.
Damaged Shroud
1. Enter Head Maintenance.
A. From Idle, press Maintenance.
B. Press Next. The head will come to rest in the center of the
chamber and the Z Platform will change position. Choose
Head Maintenance.
2. Position the blade of the putty knife supplied with Start-Up Kit
between the Tip Shroud and Tip Shield
3. Use the blade to separate the Tip Shroud from the Tip Shield.
Figure 24: Material Buildup Behind Tips
Figure 25: Tip Shroud Damage
The head area is very hot!! Use leather
gloves when working in this area of
printer!
Dimension BST 1200es / SST 1200es User Guide
WARNING
(Figure
Maintenance 59
26)