Networking The Printer - µ-Dimension BST 1200es User Manual

Networking the printer

There are two methods of connecting your printer to your workstation, over a network or with a
direct connection to your workstation.
Connecting through a network:
1. Locate the network cable (blue) from the startup kit.
2. Connect the network cable between the printer and the network hub. See
Figure 9 Connecting through a network
3. Establish communication, see
page 16
network:" on page 17
Connecting directly to a workstation:
1. Locate the crossover cable (orange) from the startup kit.
2. Connect the crossover cable between the printer and the network port on your workstation.
See Figure 10.
3. Establish communication, see
"Establishing communication on a dynamic network:" on
if you have a dynamic network, or see
if you have a static network.
"Establishing communication on a static network:" on page 17
"Establishing communication on a static
12
Figure 9.