Figure 1 1
Connecting power
Powering On
WARNING:
tip reach temperatures of approximately 75° C (167° F) and 280° C (536° F) respectively.
Personal injury can occur if proper techniques and safety materials are not used. Use the
leather safety gloves provided in the Startup Kit when working inside the printer.
1.
Switch the circuit breaker to the on (I) position. Power is now supplied to the system. The system
is ready to be 'Powered ON'. See
Figure 12
Location of circuit breaker
The build chamber and extrusion-head tip get very hot! The chamber and head
Figure 12.
14