Installing System Software On Printer - µ-Dimension BST 1200es User Manual

c. In the Add 3D Printer window, enter a name and location of your
choice in the appropriate fields.
d. Enter the IP Address for your printer in the appropriate field. It will
be the same address as entered in step 6.
e. Select your printer type from the drop down list, either BST 1200es
or SST 1200es.
Note:
f. Click Add Printer and close the Add 3D Printer window.
3. If you are unable to connect the printer to your workstation, contact your Network
Administrator.

Installing System Software on printer

1. From the display panel, press Maintenance.
2. Press System.
3. Press Load Upgrade. "Send upgrade from workstation" and the printer IP address will be
displayed.
4. From your workstation, open CatalystEX by double clicking on the CatalystEX icon.
5. Click the Printer Services tab.
6. Select your printer from the drop down list then click the Update Software button.
7. Navigate CatalystEX to the directory where the system software file is located and select the
SST1200es.upg file for SST 1200es or BST1200es.upg for BST 1200es. system software will
now begin to download to the printer.
Note:
8. When system software verification is complete, the printer display will show Reboot to
complete upgrade? Press Yes. The printer will then load the system software then reboot and
return to Idle.
Note:
If you only have one printer connected, it will be the only printer in the list.
Default 1200es system software location for 32 bit systems:
C:\Program Files\Dimension\1200es <version>
Default 1200es system software location for 64 bit systems:
C:\Program Files (x86)\Dimension\1200es <version>
Loading system software will take approximately 10 minutes.
19