Aileron Pushrod Installation; Installing The Main Gear Wires - Seagull Models SPARROW HAWK 62 CC Assembly Manual

SPARROW HAWK Instruction Manual
Pre-drill at factory.
3.2 mm.
M lock nut.
Wing bottom.
3
M nut.
3
control horn.
Aluminium washer.
Loctite secure.
Aileron control horn.
Repeat the procedure for other aileron.

AILERON PUSHROD INSTALLATION.

INSTALLING THE MAIN GEAR WIRES.

Aileron pushrods assembly follow pictures
below.
3 x 15 mm.
3 x 10 mm.
Pushrod L= 114mm.
M lock
3
(Wheel not
Metal Levis.
included).
Center the servo using the radio system.
6