Sleep Mode; Reset Functions - VDO X1 Instruction Manual

GB SLO PL JP
BIKE SERVICE/BIKE 1
(use to switch to bike 2)
Confirm with M .
BIKE 1 ...SET DISTANCE/
CONTINUE. You can set the flash-
ing digits using To access
the next digit, confirm with

5.7 Sleep mode

Your VDO computer is equipped with a sleep
mode function.
In sleep mode, a large part of the display is switched
off to save battery power. Time and service
interval display continue to be displayed.
16 X1
Repeat the steps until the last digit on the right
is flashing. Confirm with M .
BIKE 1/SET OK? Confirm with M .
The display confirms: BIKE SERVICE/SET DONE.
Automatic return to SETTINGS/SELECT.
M .
Sleep mode switches itself on after 5 minutes if
no speed impulses are processed and no button
is pressed.
Sleep mode is ended when speed impulses are
processed again (when cycling) or a button is
pressed.
VDO CYCLECOMPUTING

5.8 Reset functions

You use the RESET function to set any of these back
TOUR DATA
B
ODO TOTAL
B
With the respective reset modes, the following
information is deleted:
TOUR DATA: Day's tripdistance, ride time,
B
average speed, max. speed
ODO TOTAL: Total km, km bike 1, km bike 2
B
Using go to SETTINGS/
SELECT. Confirm with .
M
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
Using go to DATA RESET/
SELECT. Confirm with M .
www.vdocyclecomputing.com
JP PL SLO
Use to go to the data you
want to reset:
DATA RESET/TOUR DATA
B
OR
DATA RESET/ODO TOTAL
B
Confirm your selection with
Query: SELECTED DATA/RESET?
ATTENTION: This step cannot be reversed.
Only confirm with , if you want to delete the
M
selected data. The display confirms:
DATA RESET/RESET DONE.
Automatic return to SETTINGS/SELECT.
X1
GB
M .
17