Turn Signal Light Deactivation/Reactivation; Buzzer Deactivation/Reactivation - Mitsubishi OUTLANDER Manual

Turn signal light deactivation/reactivation

The answerback function from the turn signal lights can be
turned ON or OFF separately.
1. Turn the ignition switch to the "LOCK" position. If you
started the engine with the key, remove the key from the
ignition switch.
2. Open the driver's door and turn the combination head-
lights and dimmer switch to the "OFF" position.
3. Press the UNLOCK button (2) for 4 to 10 seconds and
press the LOCK button (1) during this time.
4. Release in sequence the UNLOCK and LOCK buttons
within 10 seconds of pressing the LOCK button in step 3.
Number of chimes To lock
One chime One flash
Two chimes One flash
Three chimes No flash
Four chimes Two flashes
Five chimes No flash
Six chimes Two flashes
Seven chimes No flash
NOTE
On a vehicle equipped with a Mitsubishi Multi-Communi-
cation System, the functions can be adjusted on the
screen. For details, refer to the separate operation manual.

Buzzer deactivation/reactivation

The buzzer answerback function can be turned ON or
OFF as required.
NOTE
On a vehicle equipped with a Mitsubishi Multi-Communi-
cation System, the functions can be adjusted on the
screen. For details, refer to a separate operation manual.
Features and controls
To unlock
Two flashes
No flash
Two flashes
One flash
One flash
No flash
3
No flash
3-47