Drive Mode Indicator - Mitsubishi OUTLANDER Manual

Hide thumbs Also See for OUTLANDER:

Table of Contents

Features and controls

The drive mode can be switched while driving or stopped.

Drive mode indicator

Normally the indicator illuminates when the ignition switch is

turned to the "ON" position, and then the drive mode is dis-

played a few seconds after the engine is started.

The status of each drive mode display is as follows.

"4WD" indicator

"LOCK" indicator

If the selected drive mode indicator is blinking, the

vehicle switches automatically to front-wheel drive

in order to protect the drive-system components,

and drive mode selection is no longer possible with

The warning display is also displayed in the infor-

mation screen in the multi-information display.

Reduce speed, and if the indicator goes out after

driving a while, resume driving as before. If the indi-

cator continues blinking for more than about 5 min-

utes, have the vehicle inspected at an authorized

Mitsubishi Motors dealer or a repair facility of your

choice as soon as possible.

Show Quick Links

Table of Contents