To Listen To A Disc In The Rear-Seat Display (Vehicles With Rear-Seat Display) - Mitsubishi OUTLANDER Manual

[Vehicles with a rear-seat display]
Press the CD button (D) for more than 2 seconds.
When the power of the rear-seat display is off, the display
(E) will show "REAR" and then the external audio input
mode will be activated.
Press the CD button (D) for more than 2 seconds.
When the power of the rear-seat display is on, the display
(E) will show "AUX REAR". Press the SOURCE button
of the rear-seat display to activate VIDEO mode. (For
details, refer to the separate rear-seat display owner's
manual.)
3. To deactivate the external audio input mode, press the
RADIO button (F) or the CD button (D) to switch to
another mode.
CAUTION
!
Do not operate the connected audio equipment while
driving.
This could distract you and an accident might occur.
NOTE
The connected audio equipment cannot be operated with
the vehicle's audio system.
Depending on the connected audio equipment, it may pro-
duce noise from the speakers.
For information on how to connect and operate the audio
equipment, refer to the owner's manual for the equipment.
To listen to a disc in the rear-seat display
(vehicles with rear-seat display)
It is possible to listen to the audio from the rear-seat display
using the vehicle's speakers.
Press the CD button (4) to select the rear-seat display mode.
Each push of the CD button (4) changes the mode to the next
one in the following sequence: CD mode → rear-seat display
mode → CD mode.
The following operation of the rear-seat display is possible
from the audio system.
Source
CD
MP3/WMA
Video CD
DVD video
DVD audio
To make your desired selection, use the TRACK button (11) or
the FOLDER button (12 or 13) on the audio system.
NOTE
For more details about the rear-seat display, refer to the
separate owner's manual.
Comfort controls
N00762100039
Operation
Track selection
Folder/Track selection
Track/Scene selection
Title/Chapter selection
Group/Track selection
5-119
5