Armed Stage - Mitsubishi OUTLANDER Manual

Features and controls

Armed stage

Park the vehicle and stop the engine. Arm the system as
described below.
1. Turn the ignition switch to the "LOCK" position.
Also, if a key was used to start the engine, remove the key
from the ignition switch.
2. Make sure that the engine hood is closed.
3. Lock all doors and the tailgate by using the keyless entry
system or the F.A.S.T.-key operation.
Arm the system and leave
3
3-66
At this time, the theft-alarm indicator (A) on the audio
panel flashes for confirmation.
4. The system has entered the armed stage after about 20
seconds, when the theft-alarm indicator (A) flashing
becomes slower.
The theft-alarm indicator (A) continues to flash while the
system is in the armed stage.