When The Selector Lever Cannot Be Shifted From The “P” (Park) Position - Mitsubishi OUTLANDER Manual

When the selector lever cannot be shifted from the "P"
(PARK) position
When the selector lever cannot be shifted from the "P" (PARK)
position to another position while the brake pedal is pressed
and held down with the ignition switch at the "ON" position,
the battery may be flat or the shift-lock mechanism may be
malfunctioning.
Immediately have your vehicle checked by an authorized Mit-
subishi Motors dealer or a repair facility of your choice.
If you need to move the vehicle, shift the selector lever as fol-
lows.
1. Make sure the parking brake is fully applied.
2. Stop the engine if it is running.
3. Insert a screwdriver with a cloth over its tip into the notch
(A) of the cover. Pry gently as shown to remove the cover.
4. Depress the brake pedal with the right foot.
5. Turn the ignition switch to the "ACC" position.
N00563100034
NOTE
For vehicles with the Free-hand Advanced Security
Transmitter (F.A.S.T.-key), turn the ignition switch to the
"ACC" position with the emergency key if the vehicle
battery is flat.
6. Insert a screwdriver in the shift-lock release hole (B).
Shift the selector lever to the "N" (NEUTRAL) position
while pressing the screwdriver down.
Features and controls
3
3-95