Mitsubishi OUTLANDER Manual page 159

Hide thumbs Also See for OUTLANDER:

Table of Contents

Features and controls

5. Turn the emergency key with the F.A.S.T.-key to the

"ON" position for 5 seconds.

6. Turn the emergency key with the F.A.S.T.-key to the

"LOCK" position. Within 30 seconds after doing so,

remove the F.A.S.T.-key from the emergency key, insert

the second valid F.A.S.T.-key into the emergency key and

turn it to the "ON" position. About 10 seconds later, the

immobilizer display will start to blink.

7. When the immobilizer display starts blinking, turn the

second valid F.A.S.T.-key to the "LOCK" position and

remove it. Within 30 seconds after doing so, insert a blank

F.A.S.T.-key into the emergency key and turn it to the

"ON" position. Perform this operation no more than 30

seconds after the immobilizer display starts blinking.

When registration of the ID code is complete, the immobi-

lizer display will come on for 3 seconds then go off. If an

error occurs, the immobilizer display will go off during

the procedure.

8. If you wish to register another F.A.S.T.-key, repeat the

process from step 1.

Show Quick Links

Table of Contents