To Play From A Usb Memory Device; Supported Compressed Music Files - Mitsubishi OUTLANDER Manual

Comfort controls

To play from a USB memory device

1. Press the PWR button (3) to turn on the audio system. The
system turns on in the last mode used.
2. Connect your USB memory device to the USB input ter-
minal.
Refer to "How to connect a USB memory device" on page
3-260.
3. Press the CD button (2) several times to switch to the USB
mode. The input mode changes as follows every time the
CD button is pressed.
CD mode → USB mode → Bluetooth
equipped) → Rear-seat display mode (if so equipped)
NOTE
If your vehicle is equipped with audio/video input RCA
terminals, pressing and holding the CD button for 2 sec-
onds or more switches the system to the AUX mode.
5
4. Once the device is selected, playback starts and "U"
appears on the display.
NOTE
Depending on the condition of your USB device, it may
take a longer time before the playback starts.
5. To stop the playback, press the RADIO button (1) or CD
button (2) to switch to a different mode.
NOTE
To adjust the volume and tone, refer to "To adjust the vol-
ume" on page 5-48, 5-68 and "To adjust the tone" on page
5-48, 5-68.
5-108

Supported compressed music files

N00764000058
This audio can play MP3, WMA, AAC and WAV files
recorded in a USB memory device. This audio supports up to
65,535 files in 700 folders on 8 levels.
®
mode (if so
N00764100059