Changing The Reset Mode For Average Fuel Consumption And Average Speed - Mitsubishi OUTLANDER Manual

Features and controls
Changing the reset mode for average fuel consumption
and average speed
You can change the mode condition for the average fuel con-
sumption and average speed display to "Auto reset" or "Man-
ual reset."
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-178.
2. Lightly press the multi-information meter switch to select
"AVG" (average fuel consumption and average speed set-
3
ting).
3-180
Type 1
N00557000142
Type 2
3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch in sequence from A
(Auto reset) → M (Manual reset) → A (Auto reset).
The setting is changed to the selected reset condition.