Mitsubishi OUTLANDER Manual page 301

Features and controls
2. Lightly press the multi-information meter switch to select
" " (language cooperative control).
Type 1
3
Type 2
3. Every time the multi-information meter switch is pressed
for a long time, the setting will change as follows: A
(language cooperation: enabled)→ M (language coopera-
tion: disabled)→ A (language cooperation: enabled). The
setting is changed to the selected condition.
3-186
NOTE
If the battery is disconnected, the memory of the language
cooperative control is erased and is automatically set to
"A" (language cooperation: enabled).
The language display modified with the language setting
can be switched in the following manner.
• When "A" (language cooperation: enabled) has been
selected with the language cooperative control, the lan-
guage for Mitsubishi Multi-Communication System (if
so equipped) or Bluetooth
equipped) is automatically changed to the language
selected for the multi-information display.
• When "M" (language cooperation: disabled) has been
selected with the language cooperative control, the lan-
guage for Mitsubishi Multi-Communication System (if
so equipped) or Bluetooth
equipped) is not automatically changed to the language
selected for the multi-information display.
®
2.0 interface (if so
®
2.0 interface (if so