To Resume The Set Speed - Mitsubishi OUTLANDER Manual

Features and controls

To resume the set speed

If the set speed driving is deactivated by the condition
described in "To deactivate" on page 3-146, you can resume
the previously set speed by pressing the "ACC RES" switch
(C) while driving at a speed of about 25 mph (40 km/h) or
higher.
3
3-148
Under either of the following conditions, however, using the
switch does not allow you to resume the previously set speed.
N00518900276
In these situations, repeat the speed setting procedure:
The "ON OFF" switch is pressed.
The ignition switch is turned OFF.
"CRUISE" indicator light is turned OFF.