Changing The Temperature Unit - Mitsubishi OUTLANDER Manual

NOTE
The display units for the driving range, the average fuel
consumption, the average speed and the momentary fuel
consumption are changed, but the units for the indicating
needle (speedometer), the odometer and the trip odometer
will remain unchanged.
If the battery is disconnected, the memory of the unit set-
ting is erased and is automatically set to {mpg (US) or
L/100 km}.
The distance and speed units are also changed in the following
combinations to match the selected fuel consumption unit.
Fuel Distance
economy (driving range)
mpg (US) mile (s)
mpg (UK) mile (s)
km / L km
L / 100 km km

Changing the temperature unit

The temperature display unit can be switched.
1. Press and hold the multi-information meter switch (for
about 2 seconds or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch in the "ON" position)" on page 3-178.
2. Lightly press the multi-information meter switch to select
" " (temperature unit setting).
Type 1
Speed
(average speed)
mph
mph
km / h
km / h
Type 2
Features and controls
N00557200128
3
3-183