S-Awc (Super-All Wheel Control) (If So Equipped); S-Awc Control Mode - Mitsubishi OUTLANDER Manual

Features and controls
S-AWC (Super-All Wheel Control)
S-AWC is an integrated vehicle dynamics control system that
enhances driving performance, cornering performance and
vehicle stability over a wide range of driving conditions. It
does this by integrated controls over the front-rear distribution
of driving torque to the wheels and the left-right distribution of
driving torque to the front wheels.
CAUTION
!
Do not over-rely on the S-AWC. Even the S-AWC
3
cannot prevent the natural laws of physics from act-
ing on the vehicle. This system, like any other sys-
tem, has limits and cannot help you to maintain
traction and control of the vehicle in all circum-
stances. Reckless driving can lead to accidents. It is
the driver's responsibility to drive carefully. This
means taking into account the traffic, road and envi-
ronmental conditions.
Be sure to use tires that are the same specified size,
type, and brand, and have no difference in the
amount of wear for all four wheels. Otherwise, the
S-AWC may not work properly.
NOTE
If the parking brake lever is pulled up while the vehicle is
moving, the front-rear distribution of driving torque con-
trol will be forced to turn OFF which will allow the rear
wheel to lock easier.
3-116
(if so
equipped)
N00541300049

S-AWC control mode

Select the control mode from the following three types to suit
the driving conditions.
S-AWC control
mode
Normally, use this control mode. Use this
TARMAC
mode for paved roads.
Use this control mode when driving on slip-
SNOW pery road surfaces, such as snow-covered
roads.
Use this control mode when driving on rough
LOCK roads where tires may slip or when necessary
to get out of mud or deep snow.
N00542400034
Operation