Mitsubishi OUTLANDER Manual page 454

NOTE
While the engine coolant temperature is low, the tempera-
ture of the air from the heater will be cool/cold until the
engine warms up, even if you have selected warm air with
the dial.
When the temperature is set to the highest or the lowest
setting under the AUTO operation, the air selection and
the air conditioning will be automatically changed as fol-
lows.
Also, if the air selection is operated manually after an
automatic changeover, manual operation will be selected.
• Quick Heating (When the temperature is set to the high-
est setting)
Outside air will be introduced and the air conditioning
will stop.
• Quick Cooling (When the temperature is set to the low-
est setting)
Inside air will be recirculated and the air conditioning
will operate.
The above indicates the factory settings. You can personalize
the air selection switch and air conditioning switch to match
your personal preferences.
Contact your Mitsubishi Motors dealer or a repair facility of
your choice for assistance.
Refer to "Personalizing the air conditioning switch (Changing
the function setting)" on page5-31.
Refer to "Personalizing the air selection (Changing the func-
tion setting)" on page5-29.
Mode selection dial
To change the amount of air flowing from the vents, turn the
mode selection dial. Refer to "Changing the mode selection"
on page 5-3.
Comfort controls
N00737100093
5
5-27