Spark Plugs; Fuel Hoses; Intake Valve Clearance; Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Cap) - Mitsubishi OUTLANDER Manual

Vehicle care and maintenance

Spark plugs

Spark plugs must fire properly to ensure proper engine perfor-
mance and emission-control.
Do not reuse spark plugs by cleaning or regapping. Spark plugs
should be replaced at the mileage specified in the "WAR-
RANTY AND MAINTENANCE MANUAL".
NOTE
Use the recommended or equivalent spark plugs listed
under "Engine specifications" on page 9-9. Use of other
plugs could cause engine damage, loss of performance or
radio noise.

Fuel hoses

Check the hose surfaces for any heat and mechanical damage,
hard and brittle rubber, cracking, tears, cuts and abrasions. Pay
special attention to the hoses closest to high heat sources such
as the exhaust manifold. Check all the hose connections, such
as clamps and couplings, to make sure they are secure and that
there are no leaks. If you see any wear or damage, replace the
hoses immediately.

Intake valve clearance

7 Have the valve clearance checked at an authorized Mitsubishi
Motors dealer at the mileage specified in the "WARRANTY
AND MAINTENANCE MANUAL".
If the engine sounds abnormally loud, have adjustments made
by an authorized Mitsubishi Motors dealer.
7-36
Fuel system (tank, pipe line and connection, and
fuel tank filler cap)
N00940900231
Check these regularly for damage or leaks in the fuel lines and
connections. Check the fuel tank filler cap for damage or loose-
ness. Pay special attention to the fuel lines closest to high heat
sources such as the exhaust manifold.
WARNING
!
If you see a fuel leak or if you smell fuel, do not run
the engine. Any spark (including from the ignition),
flame or smoking material could cause an explosion
or fire. Call an authorized Mitsubishi Motors dealer
or a repair facility of your choice for assistance.
N00941000040
N00950100050
N00941300173