Sirius Id Indication; To Skip Or Lock A Desired Channel-Menu Mode - Mitsubishi OUTLANDER Manual

Comfort controls
NOTE
If you store a channel in the memory, you can call up your
desired channel immediately by simply pushing the corre-
sponding Memory select button (10).

SIRIUS ID indication

If you press a channel selection button (5 or 6) to select "CH
0", the SIRIUS ID will be displayed.
5
1. If you select "CH 0", the SIRIUS ID (12 digits) will be
displayed.
2. To stop the SIRIUS ID indication, press a channel selec-
tion button (5 or 6) and select a channel other than "CH
0".
5-80
To skip or lock a desired channel - MENU mode
You can set the satellite radio so that it locks a desired channel
or skips the channel during channel selection.
1. While the satellite radio is tuned in to the channel, press
the TUNE/SOUND switch (7) for about 2 seconds or
longer to enter the MENU mode.
2. In the MENU mode, the satellite radio channel SKIP set-
ting and LOCK setting are possible.
Each time you press the TUNE/SOUND switch (7), the
status will change in the following sequence.
"SKIP SETTING" (SKIP setting mode) → "LOCK SET-
TING" (LOCK setting mode) → "SCV ON" → "PHONE
OFF" → MENU mode off.
NOTE
The MENU mode will automatically shut off when either
the radio or CD is selected, when the TUNE/SOUND
switch (7) is pressed for about 2 seconds or longer, or
when the radio is left alone for 10 seconds.
The SKIP settings, LOCK settings and lock cancellation
code are stored in memory.
Disconnecting the battery cable will erase these settings.
(The lock cancellation code will reset to the factory set-
ting: "1111".)
For more information on the SCV function, refer to
"Speed Compensated Volume function" on page 5-51.
"PHONE OFF" is displayed but the function is not
enabled.
If the vehicle is equipped with a Mitsubishi Motors autho-
rized hands-free phone system, "PHONE OFF" will not
be displayed.