Inserting And Ejecting A Floppy Disk - Fujitsu Primergy RX100 S2 User Manual

1.4.4 Inserting and Ejecting a Floppy Disk

■ Cautions
When using a floppy disk, note the following points.
• Do not expose the disk to any fluids.
• Do not open the shutter of the floppy disk and touch the disk surface.
• Do not bend the floppy disk or place heavy objects on it.
• Do not expose the floppy disk to strong magnetic fields.
• Do not drop the floppy disk on hard surfaces.
• Do not store the disk in extremely hot or cold conditions.
• Do not put layers of labels on the floppy disk.
• Keep the disk away from condensation or water droplets.
■ Inserting the Floppy Disk
Insert the floppy disk into the floppy disk drive from the shutter side.
When clicking into place, the floppy disk eject button pops out.
Shutter
Label side up
■ Ejecting the Floppy Disk
Make sure that the floppy disk access LED is off. Press the floppy disk eject button.
The floppy disk is ejected.
Off
Floppy disk access LED
Floppy disk eject button
Floppy disk eject button
• Do not eject the floppy disk while the floppy disk access LED is on. The data
stored on the floppy disk may be damaged.
PRIMERGY RX100 S2 User's Guide
1
33