Preparation Of The Pxe Server (When The Pxe Server Is Used) - Fujitsu Primergy RX100 S2 User Manual

Chapter 3 OS Installation Using ServerStart
●
Checking Server Free Space
The following table shows the amount of free space required for each installation resource.
table: Free Space Required for Resources
Resource
ServerStart
Windows Server 2003
Windows 2000 Server
Windows 2000 Service Pack 4
Calculate the total resource size. Check that the remote resource server / PXE server has enough free
space (free space greater than the space required for the resources). When the amount of free space is
insufficient, you must use more remote resource servers.
3.4.3 Preparation of the PXE Server (When the PXE Server
is Used)
When performing remote installation using a PXE server, preparatory procedures, such as installing
ServerStart, are required.
Perform the following procedures to prepare the PXE server.
Starting the DHCP Service
Installing ServerStart
Checking Services
Setting TFTP
Preparation of Resources
■ Starting the DHCP Service
Check that the DHCP service is running on the same network.
If the DHCP service function is not installed, perform the following procedures (for Windows Server
2003) to install the DHCP service.
1
Click [Start] → [Control Panel] → [Add or Remove Applications].
88
Required free
space
About 650MB
644MB
472MB
433MB