Fujitsu Primergy RX100 S2 User Manual page 196

Chapter 8 Hardware Configuration/Utilities
Item
PIO Mode
32 Bit I/O
Ultra DMA Mode
196
table: Items on the Parallel ATA Submenu
Setting
- (Fixed parameter)
Disabled (Fixed parameter)
- (Fixed parameter)
Description
Sets the Programmed I/O (PIO) data transfer mode.
When [Type] is set to [Auto], the current settings
appear.
It can be set when [Type] is set to [CD-ROM],
[Other ATAPI], [ATAPI Removable], [IDE
Removable] or [User].
Specifies the bus width for data transfer between
the CPU and the IDE controller.
It can be set when [Type] is set to [CD-ROM],
[Other ATAPI], [ATAPI Removable], [IDE
Removable] or [User].
Sets the Direct Memory Access (DMA) data
transfer mode.
When [Type] is set to [Auto], the current settings
appear.
It can be set when [Type] is set to [CD-ROM],
[Other ATAPI], [ATAPI Removable], [IDE
Removable] or [User].