Fujitsu Primergy RX100 S2 User Manual page 215

table: Items on the Console Redirection Submenu
Item
Baud Rate
Protocol
Flow Control
Mode
Setting
• 300
• 1200
• 2400
• 9600 (at the time of
purchase)
• 19.2K
• 38.4K
• 57.6K
• 115.2K
• VT100
• VT100, 8bit
• PC-ANSI, 7bit
• PC ANSI
• VT100+ (at the time of
purchase)
• VT-UTF8
• None (at the time of
purchase)
• XON/XOFF
• CTS/RTS
• Standard
• Enhanced (at the time of
purchase)
PRIMERGY RX100 S2 User's Guide
Description
Sets the baud rate for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Sets the console type for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Sets the flow control.
This item appears when [Console Redirection Port]
is set to [Enabled].
Sets the range of use for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
8
215