Table of Contents
Advertisement
keys to highlight the PVID#[ ] field and enter the PVID for
the port.
Use the arrow keys to highlight the remaining fields and the
space bar to toggle between Enable and Disable.
Setting Up IP Interfaces
Each VLAN must be configured prior to setting up the
corresponding IP interface.
An example is presented below:
VLAN Name
System (default)
Engineering
Marketing
Finance
Sales
Backbone
Table 1-2. VLAN Example – Assigned Ports
In this case, 6 IP interfaces are required, so a CIDR notation
of 10.32.0.0/11 (or a 11-bit) addressing scheme will work.
This addressing scheme will give a subnet mask of
11111111.11100000.00000000.00000000 (binary) or
255.224.0.0 (decimal).
Using a 10.xxx.xxx.xxx IP address notation, the above
example would give 6 network addresses and 6 subnets.
9033691-01
A VLAN that does not have a corresponding IP
interface defined for it, will function as a Layer 2
Only VLAN – regardless of the Switch Operation
mode.
VID
1
2
3
4
5
6
Switch Ports
5, 6, 7, 8, 21, 22, 23, 24
9, 10, 11, 12
13, 14, 15, 16
17, 18, 19, 20
1, 2, 3, 4
25, 26
VH-2402-L3 Management Guide 43
Advertisement
Table of Contents
