Table of Contents
Advertisement
The target port is the port where information will be
duplicated and sent for capture and network analysis. This
is the port where a network analyzer would be attached to
capture packets duplicated from the source port.
To select the source port(s) for mirroring, highlight Port
Mirroring Settings and press enter.
Up to 25 entries can be made to the port mirroring table, but
it should be noted that a faster port (a 1000 Mbps Gigabit
Ethernet port, for example) should not be mirrored to a
slower port (one of the 24 100 Mbps Fast Ethernet port),
because many packets will be dropped.
Parameter
Action:<Add/Modify>
9033691-01
Figure 1-47. Target Port Selection
Figure 1-48. Port Mirroring Settings
Description
This field can be toggled between
Add/Modify and Delete using the space
bar. Entries can be added, modified or
deleted based upon the port number
entered in the Source Port [ ] field.
VH-2402-L3 Management Guide 65
Advertisement
Table of Contents
