Table of Contents
Advertisement
Stop bits
Auto-Logout
SLIP Settings
Parameter
Baud Rate
Interface Name
Local IP Address
Remote IP Address
MTU
9033691-01
uses 8 data bits.
Displays the number of bits used to indicate
that a word has been completely transmitted.
The console interface uses 1 stop bit.
This sets the time the interface can be idle
before the switch automatically logs-out the
user. The options are 2 mins, 5 mins, 10
mins, 15 mins, or Never.
Description
Sets the serial bit rate that will be used to
communicate the next time the Switch is
restarted. Applies only when the serial port is
being used for out-of-band (SLIP)
management; it does not apply when the
port is used for the console port. Available
speeds are 9600, 19,200 and 38,400 bits per
second. The default setting is 9600.
This allows for the naming of the SLIP
interface for easy reference.
This is an IP address assigned to the serial
port when it is used for SLIP
communications.
This is the IP address of the management
station that will use the SLIP protocol to
communicate with the switch.
Maximum Transfer Unit – this specifies the
maximum packet size in bytes. Can be
toggled between 1006 and 1500.
VH-2402-L3 Management Guide 25
Advertisement
Table of Contents
