Igmp Snooping Table - Enterasys VH-2402-L3 Management Manual

Figure 1-78 . Browse Router Port
The Jump to VID:[1 ] field allows the entry of any VLAN ID
(VID) of any VLAN defined on the switch. Enter the VID,
highlight GO and press enter. The table will then jump to
the VID entered.
S signifies a static router port, configured by the user.
D signifies a dynamically assigned router port, configured by
the switch.

IGMP Snooping Table

This allows the switch's IGMP Snooping table to be viewed.
IGMP Snooping allows the switch to read the Multicast
Group IP address and the corresponding MAC address from
IGMP packets that pass through the switch. The ports
where the IGMP packets were snooped are displayed,
signified with an M. The number of IGMP reports that were
snooped are also displayed in the Reports: field.
To view the IGMP Snooping table:
Highlight IGMP Snooping Status from the Network
Monitoring menu and press Enter.
9033691-01 VH-2402-L3 Management Guide 101