Table of Contents
Advertisement
If the port is attached to a device that is not IEEE 802.1Q
VLAN compliant (VLAN-tag unaware), then the port should
be set to U – Untagged.
If the port is attached to a device that is IEEE 802.1Q VLAN
compliant, (VLAN-tag aware), then the port should be set to
T – Tagged.
Press APPLY to make the additions/deletions effective for
the current session. To make enter the IP Interfaces into
Non-volatile RAM, highlight Save Changes from the Main
Menu and press enter.
In the following example screen, the VLAN "evilJulius" - VID#
2 – has been added. Ports 1, 2,12, 14, 17, 25, and 26 are
Egress ports (static members of "evilJulius". Ports 5,6, and
7 are Forbidden ports (non-members and are not allowed to
join the VLAN "evilJulius" dynamically.Example 802.1Q
VLAN add screen:
Figure 1-27. Edit 802.1Q VLANs Menu
To configure the member ports of an 802.1Q VLAN:
38 VH-2402-L3 Management Guide
9033691-01
Advertisement
Table of Contents
