Igmp Group Table - Enterasys VH-2402-L3 Management Manual

To display a particular multicast group, enter either the IP
address in the Jump to Multicast Group:[0.0.0.0] field,
enter the source IP address in the Source IP:[0.0.0.0] field,
or the source subnet mask in the Source Mask:[0.0.0.0]
field, highlight GO, and press enter.
This sets a filter to determine which IP addresses and
multicast groups from the table are displayed.
To display a particular source IP address, enter either the IP
address in the Jump to IP Address:[0.0.0.0] field, or the
source subnet mask in the Source Mask:[0.0.0.0] field,
highlight GO, and press enter.

IGMP Group Table

To view the IGMP Group table:
Highlight IGMP Group Table from the Network Monitoring
menu and press Enter.
To display a particular multicast group, enter either the IP
address in the Jump to Interface Name:[
the multicast group IP address in the Multicast
Group:[0.0.0.0] field, highlight GO, and press Enter.
9033691-01
Figure 1-86. Browse IGMP Group Table
VH-2402-L3 Management Guide 107
] field, enter