Table of Contents
Advertisement
Status:<Disabled>
To make a static DNS table entry:
Highlight Static Table Setting on the DNS Relay menu and
press Enter.
Parameter
Action:<Add/Edit>
Domain Name
IP Address
Status:<Enabled>
90 VH-2402-L3 Management Guide
bar between Disabled and Enabled.
This determines if the static DNS table
will be used or not.
Figure 1-71. DNS Relay Setup
Description
The Action:<Add/Edit> field can be
toggled between Add/Edit and Delete.
Enter the Domain name and its
corresponding IP address.
The domain name of the static DNS table
entry.
The IP address of the domain name
above.
This field can be toggled using the space
bar between Enabled and Disabled.
9033691-01
Advertisement
Table of Contents
