Table of Contents
Advertisement
Subnet Mask:[
Active:<Yes>
VID:[ ]
Multicasting
Layer 2 Multicast Setup
To setup Multicasting on the switch, when the switch is in
Layer 2 operating mode, highlight Multicasting from the
Main Menu and press Enter.
9033691-01
interface.
]
This field allows the entry of a subnet
mask to be applied to this IP interface.
This field is toggled between Yes and No
using the space bar. This entry
determines whether the subnet will be
active or not.
This field allows the entry of the VLAN ID
number for the VLAN the IP interface
belongs to.
Figure 1-35. Multicasting Menu
VH-2402-L3 Management Guide 47
Advertisement
Table of Contents
