Ip Forwarding - Enterasys VH-2402-L3 Management Manual

MAC Address:[
Port: [ ]

IP Forwarding

Static/Default Routes
With the switch in Layer 3 Operation mode, entries into the
switch's forwarding table can be made using both MAC
addresses and IP addresses. Static IP forwarding is
accomplished by the entry of an IP address into the Static IP
Routing table.
Static Address Resolution Protocol (ARP) entrees can also
be made from the Forwarding Menu.
Highlight Static/Default Routes from the Forwarding menu
and press enter.
72 VH-2402-L3 Management Guide
] Allows the entry of the MAC address of
an end station that will be entered into
the switch's static forwarding table.
Allows the entry of the port number on
which the MAC address entered above
resides.
Figure 1-56. Setup Static IP Routes
9033691-01