Remote Camera Control - Leica SL2-S Instruction Manual

REMOVING PAIRED DEVICES FROM THE LIST
We recommend removing rarely used devices from the list of known
devices to prevent unwanted connections.
▸ Select in the main menu
Leica FOTOS Leica FOTOS
▸ Select
Delete Delete
▸ Select the relevant device
• A security prompt appears on the LCD panel.
▸ Select
Yes Yes
Note
• The pairing process will have to be repeated to reconnect a deleted
device to the camera.
FIND THE MAC ADDRESS
You can find the MAC address of the Leica SL2-S in the camera
menu.
▸ Select in the main menu
Camera Information Camera Information
256 LEICA FOTOS ▸ REMOTE CAMERA CONTROL

REMOTE CAMERA CONTROL

You can take pictures and record video remotely via the mobile
device, and can also change image settings or transfer data to the
mobile device. A list of available functions and instructions for their
use can be found in the Leica FOTOS app.
REMOTE CAMERA ACTIVATION
The camera can be activated remotely from off or standby if this
function is activated in the camera. The Bluetooth function must be
active.
▸ Select in the main menu
Leica FOTOS Leica FOTOS
▸ Select
Remote Wakeup Remote Wakeup
▸ Select
On On
• The camera will scan for known devices and automatically
establishes a connection.
Important information
• Remote activation will activate the camera even if it was
switched off via the main switch.
• Accidental remote camera activation may result in unwanted
pictures taken and excessive power consumption.
• A third-party device can – provided is has been paired with
the camera – access the camera remotely if your own mobile
device is not currently connected or its Bluetooth function is
deactivated. This poses a danger of unauthorized access to
your data or camera functions.
Solution
• Only activate this function just before you want to use it.
• Disable the function as soon as it is no longer needed.
LEICA FOTOS ▸ REMOTE CAMERA CONTROL 257